How to solve the grinding problems

If the glass edging machine couldn't grind the glass edge, it is necessary to adjust the setting of the machine to ensure correct contact with the glass edge, we can try the following:

Check the adhesion device: ensure that the glass is correctly adhesion and the position is accurate. Improper adhesion position may lead to unstable placement of the glass, couldn't grind the glass edges.

2. Adjust the position of the grinding head: Most grinding machines allow adjustment of the height and Angle of the grinding head. Check and adjust the grinding head so that it is aligned with the glass edge.

3. Check the guide rail and positioner: Make sure the guide rail is clean and the positioner is set correctly, which affects the path of the glass into the grinding head.

4. Adjust the grinding range: Some machines have Settings that control the grinding width, make sure that this setting is appropriate for your glass size.

5. Check and correct the input: If it is an automaton, the wrong size input may lead to the grinding edge is not in place, re-check the input size information.

If the above steps do not solve the problem, you may need to consult the machine's user manual or contact professional engineer to check. The exact method of adjustment will vary for each machine, and following the official guidelines for the device is always the safest choice.